RF Detector with LCD frequency display
Part# AP709

Price: $349.85

Features & Specifications

7 digit liquid crystal display
Frequency counter for digital on/off keying and analog signals with a minimum pulse width of 250uS
Ultra sensitive synchronous detector
Two range positions:
1ghz position for frequencies 30mhz to 0.8ghz
2.8ghz position for frequencies 500mhz to 2.8ghz
16 section bargraph to show RF signal strength (-35dBm to 0dBm)
Two antennas
Squelch adjustment for input signals
Hold switch to lock the display
Low battery indicator

Impedence: 80 Ohms (BNC Socket) VSWR less than 2:1
Frequency Range: 30mhz - 2.8ghz
Sensitivity: Less than 5mV
Max. Input: 15 dBm
Resolution: 10khz for digital signals or on/off key & 1khz for analog signals
Weight: 210 grams
Size: 80mm x 68mm x 31mm
Housing: Stamped aluminum with black anodized finish
Power: 9 vDC 300 mA
Battery Life Full Charge: Average 5 hours

The 709 has features that other units can't match. First and foremost is the readout which displays the frequency it detected activity on. This allows you to know the exact frequencies being used in your area. Knowing the frequency means that if you have a tunable receiver monitor, you can then tune into the signal. Other RF detectors only tell you if there is activity. This RF detector shows you there is activity, but also, shows you the frequency being used.

Available Models: AP709

Related Products